- You are the admin of the room
- You are connected to the Room
- Have access to the host you are trying to adopt
- Room has free host license
- Raspberry Pi running Raspbian OS
The below GIF demonstrates how to adopt Raspbian OS machine
- Go to Host tab on CloudLAN app
- Click on Add host
- Give it a name, Select Host agent & click Continue
- Select Raspbian OS from OS dropdown & copy the installation command
wget -O clan-server https://cdn.simply5.io/cloudlan/apps/clan-server-rpi ; chmod +x ./clan-server; sudo ./clan-server
- Paste the command into machine terminal and execute it to install Host agent
- Copy One time code from the CloudLAN App
- Paste One time code on your machine terminal when prompted.
(One time Code will be valid for only 10 minutes, you can regenerate if it expires )
- Agent will install necessary drivers & connect the machine to CloudLAN room
- Machine will be seen online from CloudLAN app and now you can add services running on Server using add service button
Quick troubleshoot : If there are any error at the time of adoption please follow uninstall steps below & try readopting once again
Check status of Host agent
sudo systemctl status clan
Stop Host agent & temporarily disconnect from the room
sudo systemctl stop clan
Start Host agent & reconnect to the room
sudo systemctl start clan
Check IP adaptors status
How to Remove Host agent in Raspbian OS?
- Execute below command in the server terminal to run the uninstaller
wget https://cdn.simply5.io/cloudlan/apps/uninstall-clan-server.sh ; chmod +x ./uninstall-clan-server.sh; sudo ./uninstall-clan-server.sh
- Once your server is offline you can remove the host from your CloudLAN room using remove button which will free your Host license
Reboot the machine to clear the background service
How to Readopt Host
Re-adoptions helps in cases where the host app got logged out and you don't want the host IP to change.
- Once the Host shows as offline
- Select a host and click on Re-adopt host option.
- A New Auth code for host re-adoption will be displayed
- Copy new auth code
- Run the uninstall command to remove old host app
- Follow Host adoption steps for Raspbian
- Enter new auth code when it's prompt for adoption code.
- Once the Auth code is validated the client will be connected.
Got a question not answered in this knowledge base?
Contact us at [email protected] or "chat with support" from our website or inside the app